Siser Easyweed Fluorescent Raspberry

Sale price$4
In stock


EasyWeed™ is the number one selling cuttable heat transfer vinyl material!

Applies at a lower temperature and can be peeled HOT or COLD, it also doesn't lift during weeding. It's also extremely durable wash after wash and uses a lower pressure setting for application.

SPECIFICATIONS: PU composition • Pressure sensitive backing • Semi-gloss finish • 90 Microns / 3.5 Mils • 45°/60° blade • Can be layered

APPLIES TO: 100% cotton • 100% uncoated polyester • Poly/cotton blends • Leather

HEAT APPLICATION: Time: 10-15 Seconds • Temperature: 305° F / 150° C

Pressure: Medium

Peel: HOT or COLD

CARE INSTRUCTIONS: Do not dry clean • Machine wash WARM / mild detergent • Dry at normal setting • No chlorine bleach • Wait 24 hours before first wash

*Please note the colors shown above are a resemblance of what we offer and may not be an exact reflection of what you receive.

Only 100% genuine Siser HTV is used. All sheets are +/- 0.25"


Blade: Standard
Setting: Iron-on

Silhouette Cameo:

Blade: Standard, 3
Setting: Heat Transfer Material (smooth)
Speed: 8
Thickness: 6

Scan N Cut:

Blade: 2
Cut Speed: 1
Cut Pressure: 1

Roland GS/GX-24:

Blade: 45°
Gram Force: 80-90
Offset: .250
Speed: 25-50 cm/s


Blade: 45°
Gram Force: 8-9
Tool: CB09U+0
Speed: 30 cm/s

Application instructions (home iron)
• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 5-10 seconds
• Peel carrier hot or cold
Application Instructions (heat press)
• Cut in reverse
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 305°F/150°C
• Use medium pressure for 10-15 seconds
• Peel carrier hot or cold

Estimate shipping

You may also like

Recently viewed