
EasyWeed™ is the number one selling cuttable heat transfer vinyl material!
Applies at a lower temperature and can be peeled HOT or COLD, it also doesn't lift during weeding. It's also extremely durable wash after wash and uses a lower pressure setting for application.
SPECIFICATIONS: PU composition • Pressure sensitive backing • Semi-gloss finish • 90 Microns / 3.5 Mils • 45°/60° blade • Can be layered
APPLIES TO: 100% cotton • 100% uncoated polyester • Poly/cotton blends • Leather
HEAT APPLICATION: Time: 10-15 Seconds • Temperature: 305° F / 150° C
Pressure: Medium
Peel: HOT or COLD
CARE INSTRUCTIONS: Do not dry clean • Machine wash WARM / mild detergent • Dry at normal setting • No chlorine bleach • Wait 24 hours before first wash
*Please note the colors shown above are a resemblance of what we offer and may not be an exact reflection of what you receive.
Only 100% genuine Siser HTV is used. All sheets are +/- 0.25"
Cricut®: Blade: Standard |
Silhouette Cameo: Blade: Standard, 3 |
Scan N Cut: Blade: 2 |
Roland GS/GX-24: Blade: 45° |
Graphtec: Blade: 45° |
Application instructions (home iron) • Set iron dial between Cotton and Linen • Cover design with Kraft paper or non-stick cover sheet • Place on flat, hard surface (ironing board not recommended) • Press iron with medium/firm pressure (do not slide iron) • Press each section of design for 10-15 seconds • If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds • Peel carrier hot or cold |
Application Instructions (heat press) • Cut in reverse • Weed excess material • Preheat garment for 2-3 seconds • Apply design at 305°F/150°C • Use medium pressure for 10-15 seconds • Peel carrier hot or cold |